Configuring Networking
Configuring the WAN Settings
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
Cisco RV110W Administration Guide
(Optional) To configure the optional settings, see
Click Save.
Configuring Static IP
If your ISP assigned you a permanent IP address, perform the following steps to
configure your WAN settings:
Choose Networking > WAN.
From the Internet Connection Type drop-down menu, choose Static IP.
Enter this information:
Internet IP Address
Subnet mask
Default Gateway
Static DNS 1
Static DNS 2
(Optional) To configure the optional settings, see
Click Save.
Configuring PPPoE
To configure the PPPoE settings:
Choose Networking > WAN.
From the Internet Connection Type drop-down menu, choose PPPoE.
Enter the following information (you may need to contact your ISP to obtain your
PPPoE login information):
Configuring Optional
Enter the IP address of the WAN port.
Enter subnet mask of the WAN port.
Enter the IP address of the default gateway.
Enter the IP address of the primary DNS server.
Enter the IP address of the secondary DNS server.
Configuring Optional
2
Settings.
Settings.
23