Setting Password Complexity - Cisco RV110W Administration Manual

Administering Your Cisco RV110W

Setting Password Complexity

Setting Password Complexity

STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV110W Administration Guide
The Cisco RV110W can enforce minimum password complexity requirement for
password changes.
To configure password complexity settings:
Choose Administration > Password Strength.
In the Password Complexity Settings field, check Enable.
Configure password complexity settings:
Minimum Password
Length
Minimum number of
character classes
The new password must
be different than the
current one
Password Aging
Password aging time
Click Save.
Enter the minimum password length
(0-64 characters).
Enter a number representing one of the following
character classes:
• Uppercase letters.
• Lowercase letters.
• Numbers.
• Special characters available on a standard
keyboard.
By default, passwords must contains characters
from at least three of these classes.
Check Enable to require that new passwords differ
from the current password.
Check Enable to expire passwords after a
specified time.
Enter the number of days after which the password
expires (1–365). The default is 180 days.
7
117