Configuring The Snmp Traps - Cisco RV110W Administration Manual

Administering Your Cisco RV110W
Configuring Simple Network Management (SNMP)
STEP 3
STEP 1
STEP 2
Cisco RV110W Administration Guide
Security Level
Authentication
Algorithm Server
Authentication
Password
Privacy Algorithm
Privacy Password
Click Save.

Configuring the SNMP Traps

The fields in the SNMP Trap Configuration section allow you to configure an
SNMP agent to which the firewall sends trap messages (notifications).
To configure the traps:
Choose Administration > SNMP.
Under Trap Configuration, configure the following settings:
IP Address
Port
Choose the SNMPv3 security level:
No Authentication and No Privilege—Doesn't
require any Authentication and Privacy.
Authentication and No Privilege—Submit only
Authentication algorithm and password.
Authentication and Privilege—Submit
Authentication/privacy algorithm and password.
Select the type of authentication algorithm (MD5 or
SHA).
Enter the authentication password.
Choose the type of privacy algorithm (DES or AES).
Enter the privacy password.
Enter the IP address of the SNMP manager or trap
agent.
Enter the SNMP trap port of the IP address to
which the trap messages will be sent.
7
121