Adding Access Rules - Cisco RV110W Administration Manual

Configuring the Firewall
Configuring Access Rules
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
Cisco RV110W Administration Guide
To configure the default outbound policy:
Choose Firewall > Access Rules.
Choose Allow or Deny.
Note: Ensure that IPv6 support is enabled on the Cisco RV110W to configure an
IPv6 firewall. See Configuring
Click Save.
Reordering Access Rules
The order in which access rules are displayed in the access rules table indicates
the order in which the rules are applied. You may want to reorder the table to have
certain rules applied before other rules. For example, you may want to apply a rule
allowing certain types of traffic before blocking other types of traffic.
To reorder access rules:
Choose Firewall > Access Rules.
Click Reorder.
Check the box in the row of the rule that you want to move up or down and click
the up or down arrow to move the rule up or down one line, or select the desired
position of the rule in the drop-down list and click Move to.
Click Save.

Adding Access Rules

All configured firewall rules on the Cisco RV110W are displayed in the Access
Rules Table. This list also indicates whether the rule is enabled (active) and gives a
summary of the "from/to" zone as well as the services and users the rule affects.
To create an access rule:
Choose Firewall > Access Rules.
Click Add Row.
IPv6.
4
87