Configuring An Ipsec Remote-Access Vpn - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Chapter 9 Scenario: IPsec Remote-Access VPN Configuration
Information to Have Available

Configuring an IPsec Remote-Access VPN

Step 1
78-19186-01
(Optional) Configuring User Accounts, page 9-9
•
Configuring Address Pools, page 9-10
•
Configuring Client Attributes, page 9-11
•
Configuring the IKE Policy, page 9-12
•
Specifying Address Translation Exception and Split Tunneling, page 9-14
•
Specifying Address Translation Exception and Split Tunneling, page 9-14
•
• Verifying the Remote-Access VPN Configuration, page 9-16
Before you begin configuring the adaptive security appliance to accept remote
access IPsec VPN connections, make sure that you have the following information
available:
Range of IP addresses to be used in an IP pool. These addresses are assigned
•
to remote VPN clients as they are successfully connected.
List of users to be used in creating a local authentication database, unless you
•
are using a AAA server for authentication.
Networking information to be used by remote clients when connecting to the
•
VPN, including the following:
- IP addresses for the primary and secondary DNS servers
IP addresses for the primary and secondary WINS servers
-
Default domain name
-
List of IP addresses for local hosts, groups, and networks that should be
-
made accessible to authenticated remote clients
To configure a remote-access VPN, perform the following steps:
In the main ASDM window, choose IPsec VPN Wizard from the Wizards
drop-down menu. The VPN Wizard Step 1 screen appears.
Implementing the IPsec Remote-Access VPN Scenario
Cisco ASA 5500 Series Getting Started Guide
9-3