Chapter 6: Configuring Quality Of Service (Qos); Configuring Bandwidth Management; Configuring Bandwidth - Cisco RV110W Administration Manual

Configuring Quality of Service (QoS)

Configuring Bandwidth Management

STEP 1
STEP 2
Cisco RV110W Administration Guide
The Cisco RV110W lets you configure the following Quality of Service (QoS)
features:
• Configuring Bandwidth Management, page 111
• Configuring QoS Port-Based Settings, page 113
• Configuring CoS Settings, page 114
• Configuring DSCP Settings, page 114
You can use the Cisco RV110W bandwidth management feature to manage the
bandwidth of the traffic flowing from the secure network (LAN) to the insecure
network (WAN).

Configuring Bandwidth

You can limit the bandwidth to reduce the rate at which the Cisco RV110W
transmits data. You can also use a bandwidth profile to limit the outbound traffic,
thus preventing the LAN users from consuming all of the bandwidth of the Internet
link.
To set the upstream and downstream bandwidth:
Choose QoS > Bandwidth Management.
In the Bandwidth Management field, check Enable. The maximum bandwidth
provided by your ISP appears in the Bandwidth section.
6
111