Cisco RV110W Administration Manual page 33

Configuring Networking
Configuring the LAN Settings
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV110W Administration Guide
To create a VLAN:
Choose Networking > LAN > VLAN Membership.
Click Add Row.
Enter this information:
VLAN ID
Description
Port 1
Port 2
Port 3
Port 4
Click Save.
To edit the settings of a VLAN, select the VLAN and click Edit. To delete a selected
VLAN, click Delete. Click Save to apply changes.
Enter the numerical VLAN ID to assign to endpoints
in the VLAN membership. The number you enter
must be between 3 to 4094. VLAN ID 1 is reserved
for the default VLAN, which is used for untagged
frames received on the interface. VLAN IDs 1 and 2
are reserved and cannot be used.
Enter a description to identify the VLAN.
You can associate VLANS on the Cisco RV110W to
the LAN ports on the device. By default, all 4 ports
belong to VLAN1. You can edit these ports to
associate them with other VLANS. Choose the
outgoing frame type for each port:
Untagged—The interface is an untagged member
of the VLAN. Frames of the VLAN are sent
untagged to the port VLAN.
Tagged—The port is a tagged member of the
VLAN. Frames of the VLAN are sent tagged to the
port VLAN.
Excluded—The port is currently not a member of
the VLAN. This is the default for all the ports when
the VLAN is first created.
2
33