Configuring Vpn Passthrough - Cisco RV110W Administration Manual

Configuring VPN

Configuring VPN Passthrough

STEP 1
STEP 2
STEP 1
STEP 2
Configuring VPN Passthrough
STEP 1
STEP 2
Cisco RV110W Administration Guide
Exporting Certificates for Admin
The certificate for administrator contains the private key and should be stored in a
safe place as a backup. If the Cisco RV110W configuration is reset to the factory
default settings, this certificate can be imported and restored on the router.
To export a certificate for Admin:
Choose VPN > Certificate Management..
Click Export for Admin.
On a PC, the Device Manager saves the admin.pem file in the C:\Documents and
Settings\userid\My Documents\Downloads.
Exporting Certificates for Client
The certificate for client allows QuickVPN users to securely connect to the
Cisco RV110W. QuickVPN users must place the certificate in the install directory
of the QuickVPN client.
To export a certificate for client:
Choose VPN > Certificate Management..
Click Export for Client.
On a PC, the Device Manager saves the client.pem file in the C:\Documents and
Settings\userid\My Documents\Downloads.
VPN passthrough allows VPN traffic that originates from VPN clients to pass
through the Cisco RV110W.
To configure VPN passthrough:
Choose VPN > VPN Passthrough.
Choose the type of traffic to allow to pass through the firewall:
5
109