Configuring The Ip Mode - Cisco RV110W Administration Manual

Configuring Networking

Configuring the IP Mode

STEP 5
STEP 6
Configuring the IP Mode
STEP 1
STEP 2
Cisco RV110W Administration Guide
Password
Verify Password
Host Name
Domain Name
Internet IP Address
Status
To test the DDNS configuration, click Test Configuration.
Click Save.
Wide area network configuration properties are configurable for both IPv4 and
IPv6 networks. You can enter information about your Internet connection type and
other parameters in these pages.
To select an IP mode:
Choose Networking > IP Mode.
From the IP Mode drop-down menu, choose one of the following options:
LAN:IPv4, WAN:IPv4
LAN:IPv6, WAN:IPv4
Enter the password of the DDNS account.
(TZO.com, DynDNS.com, and noip.com) Reenter
the password of the DDNS account.
(DynDNS.com, 3322.org, and noip.com) Enter the
host name of the DDNS server.
(TZO.com) Enter the name of the domain that is
used to access the network.
(Read-only) The Internet IP address of the
Cisco RV110W.
(Read-only) Status is displayed if the DDNS update
has completed successfully or if the account
update information sent to the DDNS server failed.
Choose this option to use IPv4 in the LAN and WAN
ports.
Choose this option to use IPv6 in the LAN ports and
IPv4 in the WAN ports.
2
44