Configuring Remote Management - Cisco RV110W Administration Manual

Configuring the Firewall
Configuring Basic Firewall Settings
STEP 3
Cisco RV110W Administration Guide
Block Proxy
Click Save.

Configuring Remote Management

You can enable remote management so you can access the Cisco RV110W from a
remote WAN network.
To configure remote management, configure these settings on the Basic Settings
page:
Remote Management
Remote Access
Remote Upgrade
Allowed Remote IP
Address
Check to block proxy servers. A proxy server (or
proxy) allows computers to route connections to
other computers through the proxy, thus
circumventing certain firewall rules.
For example, if connections to a specific IP address
are blocked by a firewall rule, the requests can be
routed through a proxy that is not blocked by the
rule, rendering the restriction ineffective. Enabling
this feature blocks proxy servers.
Click Auto to automatically block proxy servers, or
click Manual and enter a specific port on which to
block proxy servers.
Check Enable to enable remote management.
Choose the type of web access that can be used
to connect to the firewall: HTTP or HTTPS (secure
HTTP).
To allow remote upgrades of the Cisco RV110W,
check Enable.
Click the Any IP Address button to allow remote
management from any IP address, or enter a
specific IP address in the address field.
4
83