Viewing The Guestnet Status - Cisco RV110W Administration Manual

Viewing the Cisco RV110W Status

Viewing the GuestNet Status

Viewing the GuestNet Status
Cisco RV110W Administration Guide
Multicast
Collisions
The guest network statistics displays information about the wireless guest
network configured on the Cisco RV110W. To view the guest network status,
choose Status > GuestNet Status. The following information is displayed:
• Host Name—Device connected to the guest network.
• IP Address—IP address assigned to the connected device.
• MAC Address—MAC or hardware address of the connected device.
• Time Left—Remaining time that the device can be connected to the guest
network. (Time limits are configured in the Wireless > Basic Settings >
Guest Net Settings page.)
• Action—Actions you can perform on the connected device (for example,
disconnect).
The number of multicast packets sent over this radio.
The number of signal collisions that occurred on this port.
A collision occurs when the port tries to send data at the
same time as a port on another router or computer that is
connected to this port.
8
147