Configuring The Asa 5550 For An Ipsec Remote-Access Vpn - Cisco ASA 5550 Series Getting Started Manual

Chapter 7 Scenario: Remote-Access VPN Configuration

Configuring the ASA 5550 for an IPsec Remote-Access VPN

Step 1
Step 2
78-17644-01
To begin the process for configuring a remote-access VPN, perform the following
steps:
In the main ASDM window, choose VPN Wizard from the Wizards drop-down
menu. The VPN Wizard Step 1 screen appears.
In Step 1 of the VPN Wizard, perform the following steps:
Click the Remote Access VPN radio button.
a.
From the drop-down list, choose Outside as the enabled interface for the
b.
incoming VPN tunnels.
Click Next to continue.
c.
Implementing the IPsec Remote-Access VPN Scenario
Cisco ASA 5550 Getting Started Guide
7-5