Cisco RV110W Administration Manual page 125

Administering Your Cisco RV110W
Configuring Logging
STEP 4
STEP 5
Cisco RV110W Administration Guide
Configure the following settings:
Remote Log Server
Log Severity for Local
Log and Email
Enable
Click Save.
To edit an entry in the Logging Setting Table, select the entry and click Edit. Make
your changes, then click Save.
Enter the IP address of the log server that will
collect logs.
Click to choose the severity of logs you want to
configure. Note that all log types above a selected
log type are automatically included and you cannot
deselect them. For example, choosing "error" logs
automatically includes emergency, alert, and
critical logs in addition to error logs.
The event severity levels are listed from the highest
severity to the lowest severity, as follows:
• Emergency—System is not usable.
• Alert—Action is needed.
• Critical—System is in a critical condition.
• Error—System is in error condition.
• Warning—System warning occurred.
• Notification—System is functioning
properly, but a system notice occurred.
• Information—Device information.
• Debugging—Provides detailed information
about an event. Choosing this severity uses
large amounts of logs to be generated and is
not recommended during normal router
operation.
To enable these logging settings, check this box.
7
125