Cisco RV110W Administration Manual page 11

Introduction
Getting to Know the Cisco RV110W
Cisco RV110W Administration Guide
Power The Power light is green to indicate the unit is powered
on. The light flashes green when the power is coming
on.
WAN The WAN (Internet) light is green when the
Cisco RV110W is connected to the Internet through
your cable or DSL modem. The light is off when the
Cisco RV110W is not connected to the Internet. The
light flashes green when it is sending or receiving data
Wireless The Wireless light is green when the wireless module is
enabled. The light is off when the wireless module is
disabled. The light flashes green when the firewall is
transmitting or receiving data on the wireless module.
LAN Ports The numbered lights correspond to the LAN ports on
the Cisco RV110W.
If the lights are continuously green, the Cisco RV110W
is connected to a device through the corresponding
port (1, 2, 3, or 4). The light for a port flashes green when
the firewall is actively sending or receiving data over
that port.
1
11