Configuring Basic Wireless Settings - Cisco RV110W Administration Manual

Configuring the Wireless Network

Configuring Basic Wireless Settings

Configuring Basic Wireless Settings
STEP 1
STEP 2
STEP 3
Cisco RV110W Administration Guide
SSID Name ciscosb1
Wireless Disabled
Isolation
with SSID
WMM Enabled
WPS Enabled
Hardware
Button
1. When using the Setup Wizard, select Best Security or Better Security to protect the
Cisco RV110W
You can use the Basic Settings page (Wireless > Basic Settings) to configure
basic wireless settings.
To configure basic wireless settings:
Choose Wireless > Basic Settings.
In the Radio field, check Enable to turn on the wireless radio. By default there is
only one wireless network enabled, ciscosb1.
In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
B/G/N-Mixed
B Only
G Only
N Only
ciscosb2
Disabled
Enabled
Disabled
from unauthorized access.
Choose this option if you have Wireless-N,
Wireless-B, and Wireless-G devices in your
network. This is the default setting (recommended).
Choose this option if you have only Wireless-B
devices in your network.
Choose this option if you have only Wireless-G
devices in your network.
Choose this option if you have only Wireless-N
devices in your network.
ciscosb3 ciscosb4
Disabled Disabled
Enabled Enabled
Disabled Disabled
3
63