Cisco RV110W Administration Manual page 74

Configuring the Wireless Network
Configuring Advanced Wireless Settings
Cisco RV110W Administration Guide
Transmission Rate
N Transmission
Rate
CTS Protection
Mode
Beacon Interval
The rate of data transmission should be set depending
on the speed of your wireless network. You can select
from a range of transmission speeds, or you can select
Auto to have the Cisco RV110W automatically use the
fastest possible data rate and enable the Auto-Fallback
feature. Auto-Fallback will negotiate the best possible
connection speed between the Cisco RV110W and a
wireless client. The default is Auto.
The rate of data transmission should be set depending
on the speed of your Wireless-N networking. You can
select from a range of transmission speeds, or you can
select Auto to have the Cisco RV110W automatically
use the fastest possible data rate and enable the Auto-
Fallback feature. Auto-Fallback will negotiate the best
possible connection speed between the Cisco RV110W
and a wireless client. The default is Auto.
The Cisco RV110W will automatically use CTS (Clear-To-
Send) Protection Mode when your Wireless-N and
Wireless-G devices are experiencing severe problems
and are not able to transmit to the Cisco RV110W in an
environment with heavy 802. 1 1b traffic.
This function boosts the Cisco RV110W ability to catch
all Wireless-N and Wireless-G transmissions but will
severely decrease performance. The default is Auto.
The Beacon Interval value indicates the frequency
interval of the beacon. A beacon is a packet broadcast
by the Cisco RV110W to synchronize the wireless
network.
Enter a value between 40 and 3,500 milliseconds. The
default value is 100.
3
74