Configuring Bandwidth Priority - Cisco RV110W Administration Manual

Configuring Quality of Service (QoS)
Configuring Bandwidth Management
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco RV110W Administration Guide
In the Bandwidth Table, enter the following information for the WAN interface:
Upstream
Downstream
Click Save.

Configuring Bandwidth Priority

In the Bandwidth Priority Table, you can assign priorities to services to manage
bandwidth usage.
To configure bandwidth priority:
Choose QoS > Bandwidth Management.
In the Bandwidth Management field, check Enable. The maximum bandwidth
provided by your ISP appears in the Bandwidth section.
In the Bandwidth Priority Table, click Add Row.
Enter this information:
Enable
Service
Direction
Priority
Click Save.
To edit the settings of an entry in the table, check the relevant box and click Edit.
When you are done making changes, click Save.
The bandwidth (kb/s) used for sending data to the
Internet.
The bandwidth (kb/s) used for receiving data from
the Internet.
Check to enable bandwidth management for this
service.
Choose the service to prioritize.
Choose the direction of the traffic you want to
prioritize (downstream or upstream).
Choose the priority of the service (low, normal,
medium, or high).
6
112