Adding New Vpn Users; Configuring Vpn Passthrough - Cisco RV120W Administration Manual

Configuring Virtual Private Networks (VPNs) and Security
Configuring Advanced VPN Parameters
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco RV120W Administration Guide
The starting IP of the PPTP client IP range is used as the PPTP server IP of the Cisco
RV120W and the remaining PPTP client IP address range is used to assign IP
addresses to PPTP clients.

Adding New VPN Users

To add new users:
Choose VPN > IPsec > VPN Users.
In the VPN Client Setting Table, click Add.
Check the Enabled box.
Enter the username.
Enter the password. If you want the user to be able to change the password, check
the Enabled box.
Under Protocol, choose the type of user:
• QuickVPN—The user is authenticated by the VPN server. See
Cisco QuickVPN Client Users, page
• PPTP—The user is authenticated by a PPTP server.
• XAUTH—The user is authenticated by an external authorization server, such
as a RADIUS server.
Click Save.
.

Configuring VPN Passthrough

VPN passthrough allows VPN traffic that originates from VPN clients to pass
through the router. For example, if you are not using a VPN that is configured on the
Cisco RV120W, but are using a laptop to access a VPN at another site, configuring
VPN passthrough allows that connection.
93.
5
Creating
106