Configuring VPN
Configuring VPN Passthrough
Configuring VPN Passthrough
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
VPN passthrough allows VPN traffic that originates from VPN clients to pass
through the device.
To configure VPN passthrough:
Choose VPN > VPN Passthrough.
Choose the type of traffic to allow to pass through the firewall:
IPsec
PPTP
L2TP
Click Save.
Check Enable to allow IP security tunnels to pass
through the device.
Check Enable to allow PPTP tunnels to pass
through the device.
Check Enable to allow Layer 2 Tunneling Protocol
(L2TP) tunnels to pass through the device.
9
114