Resetting Bios Passwords - Gateway E-9220T User Manual

9
Follow the instructions in
10
Reconnect the power cords and turn on the server. The BIOS memory is cleared.
11
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
12
Follow the instructions in
13
Place the jumper back onto pins 1-2.
14
Follow the instructions in
15
Turn on the server. A message appears saying that the CMOS Date and Time are not set.
16
Press F1 to reset the BIOS to factory default settings.

Resetting BIOS passwords

To reset BIOS password(s), you must either reset and clear all BIOS settings, or use the
Password Clear jumper. To reset BIOS passwords, follow the instructions in
BIOS" on page 68.
To clear the BIOS password(s):
1
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
2
Follow the instructions in
Caution
"Closing the server case" on page
"Opening the server case" on page 30
"Closing the server case" on page
"Opening the server case" on page
Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.
www.gateway.com
Resetting the BIOS
37.
37.
"Resetting the
30.
69