Resetting Bios Passwords - Gateway 9315 User Manual

7
Place a jumper across the Force Erase pins (1-2) of jumper J1H5 (CMOS Clr).
8
Reconnect the power cords and turn on the server. The BIOS settings are cleared.
9
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
10
Place the jumper back onto pins 2-3.
11
Follow the instructions in

Resetting BIOS passwords

To reset BIOS password(s), you must either reset and clear all BIOS settings or use the
Password Clear jumper. To reset BIOS passwords, follow the instructions in
BIOS" on page
To clear the BIOS password(s):
1
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
2
Follow the instructions in
98
"Closing the server case" on page
97.
"Opening the server case" on page
www.gateway.com
39.
"Resetting the
38.