Single Card Settings; Multiple Cards Configurations Synchronisation - Dell PowerEdge UPS 500T User Manual

6.1.2. SINGLE CARD SETTINGS

Dell Multi UPS Management Console can configure a single card. Proceed as follows:
x
Login with an administrator profile.
x
Select one card from the list.
x
From the Node List button
The access status changes from Access Denied (
x
After a few seconds, the Node configuration panel is updated.
x
Click on the Edit button
In the Configuration Window check the parameters you want to change and fill in the new
values.
x
Apply the changes.
x
The parameters that have different values on the cards and on the configuration to apply
have the following sign " ".
x
Then select the parameters you want to synchronize (with the check box).
x
Then click on Synchronize button.

6.1.3. MULTIPLE CARDS CONFIGURATIONS SYNCHRONISATION

Dell Multi UPS Management Console can synchronize multiple cards configurations. Proceed as
follows:
x
Select several cards from the list.
x
From the Node List button
The access status changes from: Access Denied (
x
After a few seconds, the Node configuration panel is updated.
x
From the combo box select the configuration that will be the model [or Click on the Edit
button ].
x
The parameters that have different values on the cards have following sign " ".
x
Select the parameters you want to synchronize (with the check box).
x
Click on Synchronize button.
Dell MUMC – User Guide
P 164000119 Rev 0.03
Dell Multi UPS Management Console
> Set Login Parameters, enter the card Login and Password.
[or load a previously created configuration].
> Set Login Parameters, enter the card Login and Password.
) to Access OK ( ).
) to Access OK ( ).
USER GUIDE
Dell.com
33