Policy Manager Service Types - Dell Powerconnect W-ClearPass Hardware Appliances User Manual

Policy Manager Service Types

The following service types come preconfigured on Policy Manager:
Table 39:
Policy Manager Service Types
Service Type
DellW-Series
Wireless
802.1X Wireless
92
Description/ Available Policy Components (in tabs)/ Service Rule (in Rules Editor)/
Service-specific policy components (called out with legend below)
Template for wireless hosts connecting through a Dell W-Series 802.11 wireless access device
or controller, with authentication via IEEE 802.1X. Service rules are customized for a typical Dell
W-Series Mobility Controller deployment.
Refer to the "802.1X Wireless " on page 92
For wireless clients connecting through an 802.11 wireless access device or controller, with
authentication via IEEE 802.1X. By default, the template displays with the Service, Authentication,
Roles, Enforcement, and Summary tabs. In the More Options section, click on Authorization,
Posture Compliance, Audit End Hosts, or Profile Endpoints to enable additional tabs.
To configure authentication methods and authentication source, click on the Authentication tab.
The Authentication methods used for this service depend on the 802.1X supplicants and the type
of authentication methods you choose to deploy. The common types are PEAP, EAP-TLS, EAP-
FAST or EAP-TTLS (These methods are automatically selected). Non-tunneled EAP methods
such as EAP-MD5 can also be used as authentication methods.
The Authentication sources used for this type of service can be one or more instances of the
following: Active Directory, LDAP Directory, SQL DB, Token Server or the Policy Manager local
DB. For more information on configuring authentication sources, refer to
Authentication Sources " on page
You can enable Strip Username Rules to, optionally, pre-process the user name (to remove
prefixes and suffixes) before authenticating and authorizing against the authentication source.
To create an authorization source for this service click on the Authorization tab. This tab is not
visible by default. To enable Authorization for this service select the Authorization check box on
the Service tab. Policy Manager fetches role mapping attributes from the authorization sources
associated with service, regardless of which authentication source was used to authenticate the
user. For a given service, role mapping attributes are fetched from the following authorization
sources:
The authorization sources associated with the service. For more information on configuring
authorization sources, refer to
service type for a description of the different tabs.
127.
"Adding and Modifying Authentication Methods" on page
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
"Adding and Modifying
111.