Introduction; Purpose Of This Documentation; History - Siemens SIWAREX WL200 Series Operating Instructions Manual

Introduction

1.1

Purpose of this documentation

These instructions contain all information required to commission and use the device. Read
the instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
See also
Technical support (Page 99)
1.2

History

The following versions of this documentation have been released to date. The changes apply
to the previous version:
Table 1- 1
Edition
10/2008
04/2009
07/2010
09/2010
02/2013
09/2013
11/2013
11/2014
03/2015
05/2016
SIWAREX WL200
Operating Instructions, 07/2016, A5E02199611B-03
History
Remarks/changes
Initial release
Addition to SP-S SA 30 t load cell.
Designation updated: WL200 instead of WL 200.
Corrections made mainly to the specifications.
Additions to explosion protection and ATEX approval
Addition to WL280 RN-S SA 10 t; 13 t; 28 t and 60 t load cells.
Addition to WL280 RN-S SA 60 kg to 5 t load cells
Addition to WL270 K-S CA load cells
WL270 K-S CA load cells with additional versions (high temperature, double
bridge) and extended operating range up to 500 t. WL260 SP-S SB load
cells and WL260 SP-S SC load cells.
Expansion of the load cells WL270 K and WL280 RN for hazardous areas
Dimensions of WL250 ST-S SA changed.
Integration of load cell WL260 SP-S AE
Integration of load cell WL230 SB-S CA. Description of nameplate und
ATEX label.
General formal changes.
Addition to load cell WL290 DB-S CA
1
7