Xilinx LogiCORE IP Ethernet AVB Endpoint v2.4 User Manual page 172

Appendix A: RTC Time Stamp Accuracy
Hopefully these examples have illustrated that the timing uncertainty in the asynchronous
sampling circuit has not resulted in any additional error.
The maximum inaccuracy, per time stamp sample, is still equal to the period of the RTC
reference clock (in this example 40 ns). By using a high frequency RTC reference clock, a
high degree of accuracy can be obtained. For example, when using a 125 MHz clock source
for the RTC, the maximum time stamp error will be 8 ns or less.
172
♦
If the flip-flop samples the new value, then Timing Case 1 results. The RTC is
sampled as 200 (resulting in an error of 39 ns which is entirely due to the
Real Time Instantaneous
♦
If the flip-flop samples the old value, then Timing Case 2 results. The RTC is
sampled 1 RTC reference clock period later as 240 (resulting in an error of only 1
ns).
www.xilinx.com
Error").
Ethernet AVB Endpoint User Guide
"RTC
UG492 September 21, 2010