Table of Contents
Advertisement
Chapter 12: System Integration
In this example, the instance of the Ethernet AVB Endpoint core should be assigned a base
address in the Microprocessor Hardware Specification (.mhs) file, to match that of the
Ethernet AVB Endpoint
CORE Generator software). Then the AVB software drivers can be assigned to this instance
in the Microprocessor Software Specification (.mss) file.
Using an ISE Software Top-Level Project
X-Ref Target - Figure 12-7
ISE tool domain
EDK tool domain
xps_intc
Figure 12-7: Connection into an Embedded Processor Sub-system with an ISE Software Top-Level Project
122
"PLB Base Address"
BRAM
lmb_bram_if_cntlr
Microblaze
xps_uartlite
pcore:
plb_port
Custom AV logic
Custom Legacy logic
www.xilinx.com
(in the generated netlist produced by the
PLB
Ethernet
AVB
t
Endpoin
PLB
interrupt_ptp_timer
interrupt_ptp_tx
interrupt_ptp_rx
AV
traffic
I/F
Legacy
traffic
I/F
Ethernet AVB Endpoint User Guide
TEMAC
Host I/F
MDIO
MAC
Ethernet
client
PHY I/F
I/F
UG492 September 21, 2010
Advertisement
Table of Contents
