Avaya Communication Manager Administrator's Manual page 1086

Screen Reference
Multifrequency-Signaling-Related Parameters
Address Digits Include End-of-Digits Signal
Indicates that an outgoing forward Group I end-of-digit signal is always sent after completion of address
digits upon request from the Central Office for outgoing calls.
Valid
entries
y/n
ANI Source for Forwarded & Covered Calls
Valid entries
caller
forwarder
Call Category for Vector ii-digits
Allows you to use the call category digit as the ii-digits on call vector steps.
Valid
entries
y/n
Do Not Send Group B Signals to CO
This field appears only if the
call without Group-B signals.
Valid
entries
y
n
Number of Incoming ANI Digits
Valid entries
0 to 15
1086
Usage
Enter y to send an outgoing forward Group I end-of-digit signal after
completion of address digits upon request from the Central Office for
outgoing calls.
Usage
Send the calling party's ANI when calls are redirected.
Send the forwarding party's ANI when calls are redirected.
Usage
If y, the call category digit, which is a part of ANI, is used as the
ii-digits on call vector steps.
Incoming Call Type
Usage
If y, does not send Group-B signals to complete an incoming call.
If n, sends Group-B signals to complete an incoming call.
Usage
Enter the number of ANI digits for incoming MFC calls.
Administrator's Guide for Avaya Communication Manager
field is group-ii-mfc. This field allows completion of a
November 2003