Avaya Communication Manager Administrator's Manual page 1100

Screen Reference
Music Sources
Description
Enter a description of the administered music source. This field appears only if you entered music or tone
in Type.
NOTE:
When Tenant Partitioning is enabled,
System Parameters screen disappears. However, the value in that field (tone, music, or
none) will appear as the first entry on the Music Sources screen. If the value was music,
the port number also appears on the Music Sources screen. When Tenant partitioning is
disabled,
screen, along with the values from the Music Sources screen.
Valid entries
20 alpha-numeric character (maximum)
Port
Enter the auxiliary trunk or analog port address of the music source. Duplicates are not allowed. This
field appears only if you entered music in
Valid entries
01 through 44
(DEFINITY R) or
01 through 03
(DEFINITY CSI, SI) or
1 through 64
(S8700 IP-Connect / S8700
Multi-Connect / S8300 Media
Server)
A through E
0 through 20
01 through 04
(Analog TIE trunks)
01 through 31
1 through 80
(DEFINITY R, CSI) or
1 through 10 (DEFINITY SI)
or
1 through 250
(S8700 IP-Connect / S8700
Multi-Connect / S8300 Media
Server)
V1 through V9
01 through 31
1100
Music/Tone on Hold reappears on the Feature-Related System Parameters
. Enter the necessary characters.
Type
Usage
First and second characters are the cabinet number
Third character is the carrier
Fourth and fifth character are the slot number
Six and seventh characters are the circuit number
Gateway
Module
Circuit
Administrator's Guide for Avaya Communication Manager
on the Feature-Related
Music/Tone on Hold
Usage
November 2003