Avaya Communication Manager Administrator's Manual page 1467

•
Incoming Circuit Identification (in-crt-id) — 3 digits
This field contains the member number of a trunk within a trunk group used for an incoming call.
For outgoing calls, this field is blank. Tandem calls contain both incoming and outgoing circuit
id-numbers.
The format of this field varies from record to record. For printer, Teleseer and 59-character
formats, the numbers appear inverted on the record. For example, the circuit ID 123 appears as
231 (tens, units, hundreds). If you want to change this to appear in hundreds, tens, units format
(123), use the Modified Circuit ID Display field on the CDR System Parameters screen.
•
Incoming TAC (in-trk-code) — 4 digits
This field contains the access code of the incoming trunk group.
•
INS (3 digits)
This field specifies the ISDN Network Service requested for a call. This field applies only to
ISDN calls. Each Network Specific Facility has a corresponding INS value, shown in
Network specific facility to INS mapping,
This field also appears as ISDN NSV (Network Service Value).
Table 55: Network specific facility to INS mapping
Network Specific Facility
OUTWATS Band 0
OUTWATS Band 1–255
Network Operator
Presubscribed Common Carrier Operator
Software Defined Network (SDN)
MEGACOM 800
MEGACOM
INWATS
Maximum Banded WATS
ACCUNET Digital Service
AT&T Long Distance Service
International 800
Multiquest
•
ISDN CC
The call charge supplied by the ISDN advice of charge function (see
Information
•
ISDN NSV
See INS.
Administrator's Guide for Avaya Communication Manager
November 2003
on page 509).
on page 1467.
INS Value
33
34–288
324
325
352
353
354
355
356
357
358
359
367
Receiving Call-Charge
Feature Reference
Call detail recording
Table 55,
1467