Avaya Communication Manager Administrator's Manual page 1177

LWC Reception
Valid
entries
audix
none
spe
Mapping Mode
Controls the mode of operation in which the cell phone will operate when mapped to this XMOBILE
extension. An XMOBILE station can be bridged to a deskset. These restrictions/modes exist because the
COR of a bridge is ignored; instead the principal's COR is used. This field allows an XMOBILE station
to function as a bridge and still be restricted.
When a cell phone is mapped to more than one XMOBILE station, then only one of the mapped
XMOBILE station may have origination or both as its Mapping Mode. Therefore, only one of the
XMOBILE stations mapped to the cell phone number is permitted to originate calls.
Valid entries
both
none
origination
termination
Map-to Station
This is the physical phone used for calls to a virtual extension. Do not use an xmobile, xdid or another
virtual extension.
Valid entries
Valid extension number
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter audix if the messages are stored on the Audio Information
Exchange System.
Enter none if LWC messages will not be stored.
Enter spe if LWC messages are stored in the system or on the switch
processor element (spe).
Usage
The cell phone can be used to originate and terminate calls
from its associated XMOBILE extension. This is the default
when the XMOBILE Type field is PHS or DECT.
The XMOBILE station is disabled administratively and
cannot originate and terminate calls from its associated
internal extension.
The cell phone may be used only to originate calls from its
associated internal XMOBILE extension by dialing into the
office server running Communication Manager.
The cell phone may be used only to terminate calls from its
associated internal XMOBILE extension. This is the default
when the XMOBILE Type field is EC500.
Usage
Enter the extension of the physical phone used for
calls to a virtual extension.
Screen Reference
Station
1177