Audible Message Waiting - Avaya Communication Manager Administrator's Manual

Assigned Member — Ext
The system automatically assigns this extension. This is the extension of the user who has an associated
Data Extension button and shares the module.
Assigned Member — Name
Display-only field that shows the name associated with the extension shown in the Assigned Member -
Ext field.
Att. Call Waiting Indication
Attendant call waiting allows attendant-originated or attendant-extended calls to a busy single-line phone
to wait and sends distinctive call-waiting tone to the single-line user.
Valid entries
y/n

Audible Message Waiting

The Audible Message Waiting tone indicates that the user has a waiting message. This field appears only
if
Audible Message Waiting
Note that this field does not control the Message Waiting lamp.
Valid entries
y/n
Audix Name
Specifies which AUDIX is associated with the station.
Valid entries
Names assigned
to an AUDIX
adjunct
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter y to assign Attendant Call Waiting to the phone.
You should not set this field to y, if the Data Restriction field is y or
the Switchhook Flash field is n, or if Data Privacy is enabled for the
phone's class of service (COS). If any of these conditions are true,
the phone cannot accept or handle call waiting calls.
is set to y on the System-Parameters Customer-Options screen.
Usage
Enter y if you want the phone user to receive stutter dial tone when
they have a waiting message and they go off-hook.
Usage
Must contain a user-defined adjunct name that was previously
administered in the Node-Names screen.
Screen Reference
Station
1161