Using Country Protocol 1, you integrate services and features such as MEGACOM, ACCUNET, and
INWATS onto a single ISDN-PRI trunk group with flexible assignment of trunks to each service or
feature. Calls such as an incoming 800 Service call that requires through-switching as an Outgoing WATS
call can be routed via the same facility. See the
services.
NOTE:
When the Avaya Media Server is connected to 5ESS, all of the services supported under
the Avaya and NI-2 country options are available.
Screens used to administer Call-by-Call
Service Selection
You administer Call-by-Call Service Selection on a per trunk group basis. The following list shows the
required screens and the fields you must use on each screen:
•
System-Parameters Customer-Options
—
Version
—
ISDN-PRI
—
ISDN-BRI Trunks
—
Usage Allocation Enhancements
•
Trunk Group
—
Service Type
—
Usage Alloc
— all fields on the Incoming Call Handling Treatment (ICHT) Table
•
Route Pattern
—
IXC
—
Service/Feature
—
Band
You can administer trunk Usage Allocation for multiple called numbers within a given Service/Feature,
or you can administer trunk Usage Allocation for incoming or outgoing calls independent of
Service/Feature.
•
System-Parameters Customer-Options
—
Version
—
ISDN-PRI Trunks
—
ISDN-BRI Trunks
—
Usage Allocation Enhancements
•
Network-Facilities (See the DEFINTY services documentation for information about the
Network Facilities screen.)
— All
Administrator's Guide for Avaya Communication Manager
November 2003
ISDN Trunk Group
on page 964for a listing of available
Feature Reference
Call-by-call service selection
1409