Avaya Communication Manager Administrator's Manual page 1150

Screen Reference
Signaling Group
Remote Office
Appears when the
Valid entries
y/n
SBS?
Appears when the
Group for NCA TSC
number administered for the
always be set to b to obtain full QSI
Valid entries
y/n
Signaling Mode
A display-only field that appears when the
Supplementary Service Protocol
Appears when the
Valid
entries
a
b
c
d
e
f
g
1150
field is h.323.
Group Type
Usage
Enter y if the signaling group serves a remote office.
field is set to h.323 . If you set this to y, you must set both the
Group Type
field and the Trunk Group for Channel Selection
SBS trunk group. The
Usage
Enter y to use SBS signaling trunk groups. The default is n.
Group Type
Group Type field is atm, h.323, or isdn-pri.
Usage
AT&T, Bellcore, Nortel.
When the Country Code field on the DS1 screen is
AT&T custom supplementary services.
When the Country Code field on the DS1 screen is
Bellcore Supplementary Services.
When the field on the DS1 screen is
Country Code
Nortel Proprietary Supplementary Services.
ISO QSIG. Also, use this entry for SBS signaling groups.
ETSI
ECMA QSIG
Allows DCS with rerouting.
field on the Trunk Group screen must be y.
Used for DCS
Feature Plus
ANSI. Available only if, on the System-Parameters Cus-
tomer-Options screen, the
ISDN-PRI
field is y.
Used for DCS
Administrator's Guide for Avaya Communication Manager
field equal to the signaling group
Supplementary Service Protocol
field is atm. This field always sets to isdn-pri.
, SSA selects
1A
, SSA selects
1B
, SSA selects
1C
must be y, and the
DCS with Rerouting
or field is y or the
ISDN-BRI
Trunk
field should
November 2003