Avaya Communication Manager Administrator's Manual page 1265

Digits
This field is used with the Digit Treatment field, and its meaning depends on the entry in that field. If the
Digit Treatment field is absorption, this field specifies how many digits are deleted. If the Digit
Treatment field is insertion, this field identifies the specific digits that are added.
Valid entries
1 to 5
Up to 4 digits,
including * and #
blank
Digit Treatment
Use this field to modify an incoming digit string (as on DID and tie trunks, for example) by adding or
deleting digits. You'll need to do this if the number of digits you receive doesn't match your dial plan.
Valid entries
blank
absorption
insertion
If you enter absorption or insertion, then you must enter a value in the
NOTE:
In a DCS network, DCS features that use the remote-tgs button (on phones at a remote
end) do not work when the incoming trunk group at your end deletes or inserts digits on
incoming calls. The remote-tgs button on a remote server/switch, for example, tries to dial
a TAC on your switch. If your end adds or deletes digits, it defeats this operation. If you
need to manipulate digits in a DCS network (for example, to insert an AAR feature access
code), do it on the outgoing side based on the routing pattern.
Digital Loss Group
This field determines which administered 2-party row in the loss plan applies to this trunk group if the
call is carried over a digital signaling port in the trunk group.
Valid entries
1 to 17
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter the number of digits to be deleted (absorbed).
Enter the actual digits to be added (inserted).
This field can be blank only if the Digit Treatment field is
blank.
Usage
The incoming digit string is not changed.
Deletes digits, starting at the beginning of the string.
Adds digits, starting at the beginning of the string.
Usage
Shows the index into the loss plan and tone plan.
Screen Reference
Trunk Group
field.
Digits
1265