Change Station Extension - Avaya Communication Manager Administrator's Manual

Screen Reference

Change Station Extension

Change Station Extension
This screen allows an administrator to change extensions on the switch from one extension to another all
at once. When the screen is filled out and submitted, all administration that was associated with the
current extension will now be associated with the new extension. Any administration references of the
extension being changed, such as references used in a vector, coverage, etc., will now reference the new
extension. Once the extension has been changed, all references to the previous extension will be removed
from the switch.
If an extension is changed that is also administered on an adjunct (such as voice mail or an ASAI link),
the extension on the adjunct must also be changed to ensure proper functionality.
NOTE:
A forwarded extension administered as a button will not be handled by the
extension-station xxxxxxx
list usage
Figure 133: Change Station Extension
change extension-station xxxxxxx
IP Parameter Emergency Location: xxx-xxxx
NOTE:
You cannot use the change extension-station command to change the extension of a
station if that station is administered as the emergency location extension for another
station. For example, if station A is administered as the emergency location extension for
station B, then:
680
command prior to changing any extensions.
CHANGE STATION EXTENSION
Station Name: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Station: xxx-xxxx
Message Lamp: xxx-xxxx
Emergency Location Ext.: xxx-xxxx
• You cannot change the extension of station A using the change extension-station
command unless you first change station B to assign a different emergency
location extension.
• You can change the extension of station B. If you do, the Change Station
Extension screen displays station A's extension in the Emergency Location Ext.
field under the From Extension header.
Administrator's Guide for Avaya Communication Manager
command. It is recommended that the administrator use the
FROM EXTENSION
--------------
change
Page 1 of 1
Port: xxxxxx
TO EXTENSION
-------------
xxx-xxxx
xxx-xxxx
xxx-xxxx
See IP-Network Map Form
November 2003