Locations - Avaya Communication Manager Administrator's Manual

Screen Reference

Locations

Locations
Use the Locations screen to provide daylight savings time displays to users, to set the area code for each
location, and to administer different location information for each location. If the
field is set to y on the
location specifications, depending on the configuration of the server that is running Communication
Manager. Otherwise, information for Location No.1 applies to all your locations.
Figure 297: Locations screen
change locations
Loc. Name
No
1 Main
xxx ___________________ __:__
xxx ___________________ __:__
xxx ___________________ __:__
xxx ___________________ __:__
xxx ___________________ __:__
xxx ___________________ __:__
xxx ___________________ __:__
xxx ___________________ __:__
xxx ___________________ __:__
ARS FAC
This field is controlled by the
system-parameters customer-options
rules that exist for administering an ARS code on the Feature Access Code (FAC) screen.
Valid entries
0 to 9
1042
System-Parameters Customer-Options
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Timezone Rule
Offset
00:00 0
__
__
__
__
__
__
__
__
__
Multiple Locations
command). Administration of this field must follow the same
Usage
Any valid FAC format is acceptable, up to four digits. Characters
* or # are permitted, but only in the first position. Many locations
are expected to share the same access code.
Administrator's Guide for Avaya Communication Manager
screen, you can administer up to 250
NPA ARS Attd
FAC FAC
___ ____ __
___ ____ __
___ ____ __
___ ____ __
___ ____ __
___ ____ __
___ ____ __
___ ____ __
___ ____ __
field on the Optional Features screen (use the
Multiple Locations
Page 1 of x
Pre- Proxy Sel
fix Rte pat
_____ _________
_____ _________
_____ _________
_____ _________
_____ _________
_____ _________
_____ _________
_____ _________
_____ _________
November 2003