Security-Related System Parameters - Avaya Communication Manager Administrator's Manual

Toll List
This entry is not required for AAR.
Valid entries
1 to 32 or blank
TSC
Set TSC to y for feature transparency on DCS+ calls and to use QSIG Call Completion.
Valid entries
y/n

Security-Related System Parameters

Use this screen to determine when Avaya Communication Manager reports a security violation. Many of
the fields on this screen repeat for each type of security violation. We have explained them once here, but
the usage is the same for all. See
security violations notification.
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
For ARS, enter the number of the ARS Toll Table associated with
the terminating NPA of the trunk group. You must complete this
field if Prefix Mark is 2 or 3.
Usage
Enter y to allow Call-Associated TSCs, and to allow incoming
Non-Call-Associated TSC requests to be tandemed out for each
preference.
Security violations notification
Screen Reference
Security-Related System Parameters
on page 1654 for more information on
1133