Avaya Communication Manager Administrator's Manual page 1131

Numbering Format
This field applies only to ISDN trunk groups. Enter a value from table below. This field specifies the
format of the routing number used for the trunk group for this preference.
This field appears when the
Customer-Options screen.
Valid entries
blank
natl-pub
intl-pub
locl-pub
pub-unk
lev0-pvt
levl0-pvt
(enter to allow Network Call
Redirection/ Transfer
lev1-pvt
lev2-pvt
unk-unk
NOTE:
To access Bellcore NI-2 Operator Service Access, the Inserted Digits field must be
unk-unk.
Pattern Number
This display-only field shows the route pattern number (1 to 640).
Prefix Mark
This entry is not required for AAR. For ARS, enter a number from 0 to 4 or blank.
Prefix Marks set the requirements for sending a prefix digit 1, indicating a long-distance call. Prefix
Marks apply to 7- or 10-digit Direct Distance Dialing (DDD) public network calls. A prefix digit 1 is sent
only when call type is foreign number plan area (FNPA) or home numbering plan area (HNPA) in the
ARS Digit Analysis table.
Administrator's Guide for Avaya Communication Manager
November 2003
ISDN-PRI or ISDN-BRI Trunks
Numbering Plan Identifier
E.164(1)
E.164(1)
E.164(1)
E.164(1)
E.164(1)
Private Numbering Plan - PNP(9)
Private Numbering Plan - PNP(9)
Private Numbering Plan - PNP(9)
unknown(0)
Screen Reference
field is y on the System-Parameters
Type of Numbering
1-MAX
national(2)
international(1)
local/subscriber(4)
unknown(0)
local(4)
Regional Level 1(2)
Regional Level 2(1)
unknown(0)
Route Pattern
1131