Avaya Communication Manager Administrator's Manual page 1294

Screen Reference
Trunk Group
Maintenance Tests
Appears when the Group Type field is aplt or tie.
Valid entries
y/n
Measured
Indicates if the system will transmit data for this trunk group to the Call Management System (CMS).
You cannot use internal and both unless either the
System-Parameters Customer-Options screen. If the ATM field is set to y on the System-Parameters
Customer-Option screen, this field accepts only internal or none. If this field contains a value other than
internal or none when ATM is y, none appears.
Valid entries
internal
external
both
none
MF Tariff Free
This field appears for Access, APLT, DID, DIOD, DMI-BOS, and Tandem trunk groups when the
Incoming Dial Type
cont, or dis, and the Incoming
Valid entries
y/n
1294
Usage
Enter y if hourly maintenance tests will be made on this trunk
group. One or more trunk members must be administered for this
entry to be saved.
Usage
Enter internal if the data can be sent to the Basic Call Management
System (BCMS), the VuStats data display, or both.
Enter external to send the data to the CMS.
Enter both to collect data internally and to send it to the CMS.
Enter none if trunk group measurement reports are not required.
field is mf or the
Group Type
Dial Type field is mf.
Usage
Enter y to make Communication Manager generate an MFC
Tariff-Free Backward Signal (administered on the
Multifrequency-Signaling-Related-System-Parameters screen)
during call setup instead of the "free" signal. This aids CO billing.
Administrator's Guide for Avaya Communication Manager
BCMS (Basic) or the VuStats
field is tie, the
Trunk Signaling Type
field is y on the
field is blank,
November 2003