Table of Contents
Advertisement
Quick Links
SmartNode 4554™
ISDN BRI PSTN Gateway
Getting Started Guide
Important
This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial
or residential environment.
Sales Office:
+1 (301) 975-1000
Technical Support:
+1 (301) 975-1007
E-mail:
support@patton.com
WWW:
www.patton.com
Document Number: 13236U1-001 Rev.C
Part Number: 07MSN4554-GS
Revised: October 21, 2008
Advertisement
Table of Contents
Related Manuals for Patton SmartNode 4554
Summary of Contents for Patton SmartNode 4554
- Page 1 SmartNode 4554™ ISDN BRI PSTN Gateway Getting Started Guide Important This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment.
- Page 2 Patton Electronics Company, Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA Tel: +1 (301) 975-1000 Fax: +1 (301) 869-9293 Support: +1 (301) 975-1007 Web: www.patton.com E-mail: support@patton.com Trademark Statement The term SmartNode is a trademarks of Patton Electronics Company. All other trade- marks presented in this document are the property of their respective owners.
-
Page 3: Table Of Contents
Summary Table of Contents General information............................13 Applications overview............................ 17 SN4554 installation............................19 SN4554 initial configuration......................... 24 Contacting Patton for assistance ........................34 Compliance information ..........................37 Specifications ..............................40 Cabling ................................. 45 Port pin-outs ..............................48 SN4554 factory configuration ........................ -
Page 4: Table Of Contents
Table of Contents Summary Table of Contents ........................... 3 Table of Contents ............................4 List of Figures ..............................7 List of Tables ..............................8 About this guide ............................. 9 Audience................................. 9 Structure................................. 9 Precautions ................................10 Safety when working with electricity .......................11 General observations ............................11... - Page 5 SN4554 Getting Started Guide Patton support headquarters in the USA ......................35 Alternate Patton support for Europe, Middle East, and Africa (EMEA) ............35 Warranty Service and Returned Merchandise Authorizations (RMAs)..............35 Warranty coverage ............................35 Out-of-warranty service ..........................36 Returns for credit ............................36 Return for credit policy ..........................36 RMA numbers ..............................36...
- Page 6 SN4554 Getting Started Guide SN4554 factory configuration ........................50 Introduction ................................51 End user license agreement ........................... 54 End User License Agreement ..........................55 1. Definitions ..............................55 2. Title ................................55 3. Term ................................55 4. Grant of License ............................55 5. Warranty ..............................55 6. Termination ..............................56 7.
-
Page 7: List Of Figures
List of Figures SN4554 ................14 SN4554 rear panel . -
Page 8: List Of Tables
List of Tables General conventions ..............12 Rear panel ports . -
Page 9: About This Guide
About this guide This guide describes the SN4554 hardware, installation and basic configuration. For detailed software configu- ration information refer to the SmartWare Software Configuration Guide and the available Configuration Notes. Audience This guide is intended for the following users: •... -
Page 10: Precautions
SN4554 Getting Started Guide About this guide Precautions Notes, cautions, and warnings, which have the following meanings, are used throughout this guide to help you become aware of potential problems. Warnings are intended to prevent safety hazards that could result in per- sonal injury. -
Page 11: Safety When Working With Electricity
The mains outlet shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker. The SmartNode 4554 is not shipped with power cables. For AC powered units, ensure that the power cable used meets all applicable standards for the country in which it is to be installed, and that it is connected to a wall outlet which has earth ground. -
Page 12: Typographical Conventions Used In This Document
SN4554 Getting Started Guide About this guide Typographical conventions used in this document This section describes the typographical conventions and terms used in this guide. General conventions The procedures described in this manual use the following text conventions: Table 1. General conventions Convention Meaning Indicates a cross-reference hyperlink that points to a figure, graphic, table, or sec-... -
Page 13: General Information
Chapter 1 General information Chapter contents SN4554 overview ..............................14 SN4554 rear panel ............................15 SN4554 front panel ............................16... -
Page 14: Sn4554 Overview
SN4554 Getting Started Guide 1 • General information SN4554 overview The SmartNode 4554 ISDN BRI PSTN Gateway (see figure 1) converts up to four simultaneous phone or fax calls from SIP or H.323 to BRI ISDN. it is a compact, reliable stand-alone VoIP gateway for IP-based voice systems which matches up to ISDN standards in terms of performance and quality. -
Page 15: Sn4554 Rear Panel
SN4554 Getting Started Guide 1 • General information SN4554 rear panel The SN4554 is an ISDN BRI PSTN Gateway for home or home-office use that supports two VoIP calls via a single ISDN BRI port (see figure 2). The SN4554 rear panel ports are described in table Model SN4554 Line 1... -
Page 16: Sn4554 Front Panel
SN4554 Getting Started Guide 1 • General information SmartNode 4554 ISDN BRI PSTN Gateway t e w Figure 3. SN4554 front panel SN4554 front panel Figure 3 shows SN4554 LEDs, the LED definitions are listed in table Table 3. SN4554 LED definitions... -
Page 17: Applications Overview
Chapter 2 Applications overview Chapter contents ISDN BRI PSTN Gateway application .........................18... -
Page 18: Isdn Bri Pstn Gateway Application
ISDN BRI PSTN Gateway application The SmartNode 4554 ISDN VoIP gateway enables any IP PBX to make calls to the ISDN PSTN. The com- pact, reliable stand-alone design allows enterprises to easily and flexibly integrate BRI lines into their VoIP sys- tem. -
Page 19: Sn4554 Installation
Chapter 3 SN4554 installation Chapter contents Installing the SN4554 ............................20 Placing the SN4554 ............................20 Installing cables ...............................20 Connecting the SN4554 to the PBX or ISDN BRI NT ................21 Connecting the SN4554 to the IP network ....................21 Connecting the SN4554 to the power supply ....................22... -
Page 20: Installing The Sn4554
SN4554 Getting Started Guide 3 • SN4554 installation Installing the SN4554 SN4554 hardware installation consists of the following: • Placing the device at the desired installation location (see section “Placing the SN4554”) • Connecting the interface and power cables (see section “Installing cables”) When you finish installing the SN4554, go to chapter 4,... -
Page 21: Connecting The Sn4554 To The Pbx Or Isdn Bri Nt
SN4554 Getting Started Guide 3 • SN4554 installation Connecting the SN4554 to the PBX or ISDN BRI NT The SN4554 comes with two ISDN BRI (TE) ports located on the rear panel (see figure 2 on page 15) for con- necting to the NT of an ISDN PBX or ISDN NT. -
Page 22: Connecting The Sn4554 To The Power Supply
SN4554 Getting Started Guide 3 • SN4554 installation SN4554 DHCP Server port Ethernet Hub or Switch Figure 6. Connecting the SN4554 to the network via a hub or switch 1. Using the included black Ethernet cable, connect the RJ-45 Ethernet WAN port on your SN4554 (labeled ETH), to an Ethernet hub or switch on the same network as your PC. -
Page 23: Router Front Panel Leds
SN4554 Getting Started Guide 3 • SN4554 installation t e w o I P SmartNode 4554 ISDN BRI PSTN Gateway Power VoIP BRI LAN Figure 7. Router front panel LEDs 4. Verify that the green Power LED is lit (see figure... -
Page 24: Sn4554 Initial Configuration
Chapter 4 SN4554 initial configuration Chapter contents Introduction ................................25 1. Start the SmartNode Discovery Tool.........................25 2. Access the Web Browser (GUI) Interface......................25 3. Configuring your SN4554..........................27 Accessing the Internet .............................28 Bootloader................................30 Start Bootloader ..............................30 Start-up with factory configuration .........................31 Load a new application image (SmartWare) via TFTP ..................31 Load a new application image (SmartWare) via the serial link .................33... -
Page 25: Introduction
SN4554 Getting Started Guide 4 • SN4554 initial configuration Introduction This chapter leads you through the basic steps to set up a new SN4554: • Start the SN4554 Discovery Tool (see section “1. Start the SmartNode Discovery Tool” on page 25) •... -
Page 26: Smartnode Discovery Tool Window With Webbrowser Selected
SN4554 Getting Started Guide 4 • SN4554 initial configuration Figure 9. SmartNode Discovery Tool window with webbrowser selected 2. Right-click the selected line, and select Webbrowser. The Login window will display. Figure 10. Login window 3. Enter the username administrator. Do not enter a password. Instead simply click OK. Your web browser will display the SN4554 home page (see figure 11). -
Page 27: Configuring Your Sn4554
SN4554 Getting Started Guide 4 • SN4554 initial configuration Navigation bar Current system path Configuration and status information Figure 12. Main GUI elements The GUI consists of the following main elements (see figure 12): • The “Navigation Bar” on the left edge presents you with a menu listing giving access to the various configu- ration and status pages of the SN4554. -
Page 28: Accessing The Internet
SN4554 Getting Started Guide 4 • SN4554 initial configuration The SN4554, immediately applies your changes whenever you modify the configuration. Howver, your new settings ARE NOT PERMANENTLY SAVED in non-volatile memory [RAM]. To survive power failure or manual reload you must store your new settings in non-volatile memory. -
Page 29: Wan Page
SN4554 Getting Started Guide 4 • SN4554 initial configuration Figure 13. WAN page The SN4554 supports three configuration options for the WAN connection (see figure 13), as described in the following paragraphs: • DHCP (client—factory default). The SN4554’s WAN port has a DHCP client enabled that uses an estab- lished Internet connection to get the Internet connectivity parameters (IP address, default gateway) auto- matically from a DHCP server. -
Page 30: Bootloader
SN4554 Getting Started Guide 4 • SN4554 initial configuration Note Be sure to return to the Home configuration page to save the new configura- tion in non-volatile memory. The “advanced GUI” leads you to the full complement of SmartNode configuration parameters. There are many more things that can be configured than you are presented on the “basic GUI”... -
Page 31: Start-Up With Factory Configuration
SN4554 Getting Started Guide 4 • SN4554 initial configuration Start-up with factory configuration Step Command Purpose RedBoot> fis load Copies the SmartWare application image from the persistent memory (flash:) to the volatile memory (RAM) from where it will be executed. RedBoot>... - Page 32 SN4554 Getting Started Guide 4 • SN4554 initial configuration Step Command Purpose RedBoot> go Starts the application image that was down- loaded into the volatile memory (RAM). Note With the Bootloader, only the Ethernet interface 0/0 is available. The Boot- loader applies the IP address, subnet mask, and default gateway that were last configured by the Bootloader itself or by another application (e.g.
-
Page 33: Load A New Application Image (Smartware) Via The Serial Link
SN4554 Getting Started Guide 4 • SN4554 initial configuration Load a new application image (SmartWare) via the serial link The Bootloader supports the ‘X-Modem’ and ‘Y-Modem’ protocols to download application images via the serial link of the console. Do the following to initiate the download: Step Command Purpose... -
Page 34: Contacting Patton For Assistance
Chapter 5 Contacting Patton for assistance Chapter contents Introduction ................................35 Contact information..............................35 Patton support headquarters in the USA ......................35 Alternate Patton support for Europe, Middle East, and Africa (EMEA) ............35 Warranty Service and Returned Merchandise Authorizations (RMAs)..............35 Warranty coverage ............................35 Out-of-warranty service ..........................36 Returns for credit... -
Page 35: Introduction
SN4554 Getting Started Guide 5 • Contacting Patton for assistance Introduction This chapter contains the following information: • “Contact information”—describes how to contact Patton technical support for assistance. • “Warranty Service and Returned Merchandise Authorizations (RMAs)”—contains information about the RAS warranty and obtaining a return merchandise authorization (RMA). Contact information Patton Electronics offers a wide array of free technical services. -
Page 36: Out-Of-Warranty Service
SN4554 Getting Started Guide 5 • Contacting Patton for assistance Out-of-warranty service Patton services what we sell, no matter how you acquired it, including malfunctioning products that are no longer under warranty. Our products have a flat fee for repairs. Units damaged by lightning or other catastro- phes may require replacement. -
Page 37: A Compliance Information
Appendix A Compliance information Chapter contents Compliance ................................38 ................................38 Safety ................................38 Telecom ................................38 CE Declaration of Conformity ..........................39 EG-Konformitätserklärung............................39 Authorized European Representative ........................39... -
Page 38: A Compliance Information
SN4554 Getting Started Guide A • Compliance information Compliance IMPORTANT – This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment. •... -
Page 39: Ce Declaration Of Conformity
SN4554 Getting Started Guide A • Compliance information CE Declaration of Conformity (See section “EG-Konformitätserklärung” on page 39 for German version.) Product Description: SN4554 The products described above in the form as delivered are in conformity with the provisions of the following European Directive: R&TTE Directive 1999/5/EC Guidelines of the European Parliament and the Committee for the Harmonization of the Legal Regula-... -
Page 40: B Specifications
Appendix B Specifications Chapter contents DSP..................................41 Voice connectivity ..............................41 Data connectivity ..............................41 Voice processing (signalling dependent).........................41 Fax and modem support............................41 Voice signalling ..............................42 Voice routing—session router..........................42 IP services ................................42 Management .................................43 Operating environment ............................43 Operating temperature ............................43 Operating humidity ............................43 System ...................................43 Dimensions... -
Page 41: B Specifications
SN4554 Getting Started Guide B • Specifications Note Refer to the software feature matrix for the most up-to-date specifications. One 4-channel DSP Voice connectivity Dual ISDN BRI SO (TE), 4-wire RJ45 port labeled BRI 0/0 and BRI 0/1 Point-to-point, point-to-multipoint configurable Data connectivity 10/100Base-TX Ethernet WAN port Full duplex, autosensing, auto-MDX... -
Page 42: Voice Signalling
SN4554 Getting Started Guide B • Specifications Voice signalling SIPv2 H.323v4 SIP call transfer, redirect Overlap or en-bloc dialing DTMF in-band, out-of-band Configurable progress tones Voice routing—session router Local switching Interface huntgroups Call-Distribution groups Call Routing Criteria: • Interface • Calling/called party number •... -
Page 43: Management
SN4554 Getting Started Guide B • Specifications Management Industry standard CLI with remote Telnet access HTTP web management and firmware loading TFTP configuration & firmware loading SNMP v1 agent (MIB II and private MIB) Built-in diagnostic tools (trace, debug) Operating environment Operating temperature 32–104°F (0–40°C) Operating humidity... - Page 44 SN4554 Getting Started Guide B • Specifications According to table 5, an SNMP get request to .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID of a Smart- 1.3.6.1.4.1.1768.2.4.6.1, which represents a SmartNode Node 4552 device reads out a numeric OID of 4552 device. The mapping of the sysObjectID to each of the SmartNode model is realized with the Smart- Node product identification MIB.
-
Page 45: C Cabling
Appendix C Cabling Chapter contents Introduction ................................46 Ethernet ................................46 ISDN BRI ................................47... -
Page 46: Introduction
SN4554 Getting Started Guide C • Cabling Introduction This section provides information on the cables used to connect the SN4554 and the interface cards to the existing network infrastructure and to third party products. The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and mechanical serviceability. -
Page 47: Isdn Bri
SN4554 Getting Started Guide C • Cabling ISDN BRI The ISDN port connects to ISDN terminals (PBXs) or an ISDN S-BUS using cables terminated with RJ-45 connectors. Use straight-though cables to connect to the NT port of your PBX, or residential S-BUS. -
Page 48: D Port Pin-Outs
Appendix D Port pin-outs Chapter contents Introduction ................................49 Ethernet ................................49 ISDN BRI Terminal (TE/User) port ........................49... -
Page 49: Introduction
SN4554 Getting Started Guide D • Port pin-outs Introduction This section provides pin-out information for the ports of the SN4554. Ethernet Table 6. RJ-45 Ethernet socket Signal Note Pins not listed are not used. ISDN BRI Terminal (TE/User) port The BRI terminal port uses an 8-pin RJ-45 connector (the pinout is shown in table Table 7. -
Page 50: Esn4554 Factory Configuration
Appendix E SN4554 factory configuration Chapter contents Introduction ................................51... -
Page 51: Introduction
SN4554 Getting Started Guide E • SN4554 factory configuration Introduction The factory configuration settings for the SN4554 are shown below. #----------------------------------------------------------------# # SN4554 Series # R3.xx BUILDxxxxx SIP # 2005-08-25T00:00:00 # Factory configuration file #----------------------------------------------------------------# gui type basic webserver port 80 language en profile acl ACL_WAN_PERMIT_ALL_MGMT permit 1 ip any any profile acl ACL_WAN_PERMIT_SEL_MGMT... - Page 52 SN4554 Getting Started Guide E • SN4554 factory configuration profile voip VOIP codec 1 g729 rx-length 20 tx-length 20 codec 2 g711alaw64k rx-length 20 tx-length 20 codec 3 g711ulaw64k rx-length 20 tx-length 20 dejitter-mode static dejitter-max-delay 120 context ip router interface IF_IP_WAN ipaddress dhcp use profile acl ACL_WAN_PERMIT_ALL_MGMT in...
- Page 53 SN4554 Getting Started Guide E • SN4554 factory configuration context cs switch no shutdown gateway sip GW_SIP bind interface IF_IP_WAN router service default gateway sip GW_SIP no shutdown port ethernet 0 0 bind interface IF_IP_WAN router medium auto pppoe session SES_PPPOE bind subscriber SUB_PPPOE shutdown port ethernet 0 0...
-
Page 54: F End User License Agreement
Appendix F End user license agreement Chapter contents End User License Agreement ..........................55 1. Definitions ..............................55 2. Title ................................55 3. Term ................................55 4. Grant of License ............................55 5. Warranty ..............................55 6. Termination ..............................56 7. Other licenses .............................56... -
Page 55: End User License Agreement
SN4554 Getting Started Guide F • End user license agreement End User License Agreement By opening this package, operating the Designated Equipment or downloading the Program(s) electronically, the End User agrees to the following conditions: 1. Definitions Effective Date shall mean the earliest date of purchase or download of a product containing the Patton Electronics Company Program(s) or the Program(s) themselves. -
Page 56: Termination
SN4554 Getting Started Guide F • End user license agreement If the Program(s) are acquired by or on behalf of a unit or agency of the United States Government, the Gov- ernment agrees that such Program(s) are commercial computer software or computer software documentation and that, absent a written agreement to the contrary, the Government’s rights with respect to such Program(s) are limited by the terms of this Agreement, pursuant to Federal Acquisition Regulations 12.212(a) and/or DEARS 227.7202-1(a) and/or sub-paragraphs (a) through (d) of the “Commercial Computer Software - Restricted...
Need help?
Do you have a question about the SmartNode 4554 and is the answer not in the manual?
Questions and answers