Power On And Reset Push Buttons; Leds - Intel Atom E660 User Manual

4.4

Power On and Reset Push Buttons

The carrier board has two push buttons, POWER and RESET. The POWER button
releases power to the entire board causing the board to boot. The RESET button forces
all systems to warm reset.
The two buttons are located near the PCI slot in the backside area. The POWER button
is located at SW5 and the RESET button is located at SW6. See
4.5

LEDs

Figure 15
LEDs and their reference designators.
®
Intel Atom™ Processor E660 with Intel
User Manual
46
provides the location of the LEDs and
®
Platform Controller Hub EG20T Development Kit
Reference Board Summary
Figure 11.
Table 17 describes the functions of the
Document Number: 324213-002
January 2012