Figure 3.
PCI Express* Block Diagram of the Carrier Board
COMe*
Connector
(*1): The PCIe* lane can be alternately used by the signal switch selection .
2.5.7
SATA Connectors
The carrier board provides two SATA connectors. These connectors (X29, X30) are
connected to the Intel
There is one peripheral power connector (X48) provided for the purpose of powering
external devices such as a SATA drive.
Figure 4
®
Intel
Atom™ Processor E660 with Intel
User Manual
20
SMB_Bus
PCIe* Lane2
Intel® PCH
PCIe* Lane0
EG20T
PCIe*
PCIe* Lane3
Signal Switch
DipSW
SW4-bit1
PCIe* Lane1
®
PCH EG20T for SATA Gen 1 or Gen2 compliance devices.
describes the carrier board SATA interface connection.
®
Platform Controller Hub EG20T Development Kit
PCIe* Lane3(*1)
PCIe* Lane3(*1)
PCIe* to PCI
Bridge IC
Document Number: 324213-002
Getting Started
miniPCIe*
slot (X8)
PCIe* slot #3
(X10)
PCIe* slot #2
(X52)
PCI slot #4
(X12)
January 2012