6.3
Heat Sink Installation
®
All Intel
thermal solution. This section describes how to attach the processor heat sink included
in your development kit.
You will need:
• Flat-head and Phillips-head screwdriver
• Linen free cloth
• Isopropyl alcohol (IPA)
If you are reinstalling the heat sink after removing it, you may also need thermal
interface material (TIM).
6.3.1
COM Express* Module and Carrier Board
Figure 23.
COM Express* Module and Carrier Board
®
Intel
Atom™ Processor E660 with Intel
User Manual
64
Atom™ Processor E6xx series (except the 0.6 GHz, 2.7 W devices) require a
®
Platform Controller Hub EG20T Development Kit
Quick Start
January 2012
Document Number: 324213-002