Quick Start; Required Peripherals - Intel Atom E660 User Manual

6.0

Quick Start

The development kit is shipped as an open system allowing maximum flexibility in
changing hardware configuration and peripherals. Use caution when configuring the
hardware and observe proper safety cautions and warnings. The following sections
summarize the necessary hardware and power-on instructions.
Note: Always turn off the power and unplug the power cord before changing hardware
configuration and peripherals. The user is required to observe extra precautions when
handling and operating the system.
Review the document provided with the reference board titled
Regulatory
cautions.
6.1

Required Peripherals

• ATX power supply
• Keyboard and mouse
• SATA hard drive preloaded with OS
• DVD-ROM (optional if OS is preloaded on hard drive)
• SATA cable
• LVDS panel and backlight inverter (if required)
• Associated cables
Note: PCIe* and ADD2-N (VGA output provided) graphics card "Quick Start" is not included in
this document.
®
Intel Atom™ Processor E660 with Intel
User Manual
60
Information. This document contains additional safety warnings and
®
Platform Controller Hub EG20T Development Kit
Quick Start
Important Safety and
January 2012
Document Number: 324213-002