Buttons; Leds; Power - Intel Agilex F Series User Manual

A. Development Kit Components
683024 | 2022.09.30
A.7.2. Buttons
Table 14. Buttons on the Development Kit
Board Reference
S1
S2
S3
S4
S5
A.7.3. LEDs
Table 15. LEDs on the Development Kit
Board Reference
D7
D9
D10
D12
D13
D14
D8
D11
D21
D22 (Bi-color)
D23
D24 (Bi-color)
A.8. Power
The power to the Intel Agilex F-Series FPGA Development Kit is provided from the
PCIe slot (up to 75 W) and a secondary Auxiliary 2x4 PCIe power connector capable of
an additional 150 W. The development kit does not power up until both the +12 V rails
from the PCIe slot and the secondary auxiliary PCIe power connector are detected.
The development kit can also operate as a stand-alone bench top board for laboratory
evaluation when an external 12 V power supply is connected to its 2x4 PCIe power
connector. In this mode, the external supply will supply the total 240 W power for both
the VCC core and other power rails on the board. An on-board slide switch is used to
start the power for stand-alone mode.
Send Feedback
Type
HPS cold reset
CPU reset
PCIe reset
HPS warm reset
System Intel MAX 10 reset
Schematic Signal Name
FPGA_3V3_LED0
FPGA_3V3_LED1
FPGA_3V3_LED2
FPGA_3V3_LED3
FPGA_CONF_DONE
FPGA_CVP_CONFDONE
PWR_LED_DR
OVERTEMPn
QSFPDD0_LED0
QSFPDD0_LED1
QSFPDD0_LED2
QSFPDD1_LED0
QSFPDD1_LED1
QSFPDD1_LED2
Cold reset to HPS
Fabric core reset
PCIe Hard IP reset
Warm reset to HPS
On-board Intel FPGA Download Cable
Reset
Intel Agilex FPGA Pin
Number
C30
A30
D31
B31
CA60
CA58
B12(Max10_U30)
K11(Max10_U30)
H19
F19
J20
G20
H21
F21
® ™
Intel Agilex F-Series FPGA Development Kit User Guide
Description
I/O Standard
1.2V LVCMOS
1.2V LVCMOS
1.2V LVCMOS
1.2V LVCMOS
1.8V LVCMOS
1.8V LVCMOS
3.3V LVCMOS
3.3V LVCMOS
1.2V LVCMOS
1.2V LVCMOS
1.2V LVCMOS
1.2V LVCMOS
1.2V LVCMOS
1.2V LVCMOS
35