Figure 11.
Carrier Board Feature Placement
4.2
Connectors
This section describes the board's connectors.
the connectors (including back panel side) on the board.
labels and names.
Caution:
Most of these connectors are not over-current protected. Do not use these connectors
for powering devices external to the computer chassis. A fault in the load presented by
the external devices could damage the computer, the interconnecting cable, or the
attached external device.
®
Intel
Atom™ Processor E660 with Intel
User Manual
36
®
Platform Controller Hub EG20T Development Kit
Reference Board Summary
Figure 12
shows the location number of
Table 11
lists connectors'
Document Number: 324213-002
January 2012