Trap Pdu; Figure 11-6. Relationship Between Threshold Values And Trap Generation - HP T9576G06 Management Manual

Host Resources Subagent
You can change the high and low threshold values while the subagent is running by
setting the values of zhrmThrRAMHighValue and zhrmThrRAMLowValue (for RAM
storage areas) and zhrmThrDiskHighValue and zhrmDiskLowValue (for disks) in the
zhrmThreshold group. If a threshold is changed such that a trap would be generated at
the current activity level, a trap is not generated until the activity level changes.

Figure 11-6. Relationship Between Threshold Values and Trap Generation

100
Trap Generated
Percent
Utilization
0

Trap PDU

The trap PDU contains these fields:
enterprise
agent-address
generic-trap
specific-trap
time-stamp
variable-bindings The objects that the Host Resources Subagent includes in each
NoTrap Generated
Trap Generated
The object identifier for the SNMP agent, indicating the origin of
the trap: 1.3.6.1.4.1.169.3.155.1.
The Internet address of the system on which the SNMP agent
forwarding the trap is installed.
A 16-bit number set to 6 to signify that the trap is
enterpriseSpecific.
A 16-bit number set to 0.
The value of sysUpTime, defined in
by the SNMP Agent.
trap, described in the following subsections.
SNMP Configuration and Management Manual—424777-006
NoTrap Generated
Trap Generated
NoTrap Generated
Time
Section 3, MIBs Supported
11- 101
Trap PDU
High
Threshold
Low
Threshold
VST1006.vsd