Configuration; Table 13-1. Ipx/Spx Subagent Configuration Summary - HP T9576G06 Management Manual

IPX/SPX Subagent (G-Series)
The subagent can communicate with multiple SNMP agent processes and multiple
IPXPROTO processes running on the same or remote nodes. The subagent can send
event messages to an EMS collector process on the same or a remote node. More
information about subagent configuration appears in the following subsection.

Configuration

You can configure the behavior of the subagent at startup or by setting the value of
MIB objects in the zisa group from an SNMP manager after startup.
summarizes the available options.

Table 13-1. IPX/SPX Subagent Configuration Summary

Subagent
Attribute
SNMP agent
connections
IPXPROTO
connections
EMS collector
Subagent backup
process
Keep-alive
interval
Refresh interval
Subagent
process priority
All subagent attributes that can be controlled by setting MIB object values are
reinitialized to default values when the subagent is restarted, or to values specified in
startup parameters. Refer to
configuration using startup parameters. Refer to subsequent subsections for
information on settable MIB objects.
Startup
Parameter MIB Object
-a tdmNwSaAgentName
tdmNwSaAgentState
tdmNwSaAgentStateReason
-i tdmNwSaIpxProtoName
tdmNwSaIpxProtoState
tdmNwSaIpxProtoStateReason
-c tdmNwSaEmsCollectorName
tdmNwSaEmsCollectorState
tdmNwSaEmsCollectorStateReaso
n
-b tdmNwSaBackupCPU
tdmNwSaBackupState
tdmNwSaSwitchToBackupNow
-k tdmNwSaKeepAliveTimer
-r tdmNwSaRefreshTimer
tdmNwSaRefreshNow
tdmNwSaProcessPriority
Starting and Stopping the Subagent
SNMP Configuration and Management Manual—424777-006
13-12
Configuration
Table 13-1
Default Value
$ZSNMP on
subagent's node
$ZNV0 on
subagent's node
$0 on subagent's
node
No backup
process
Every 60 minutes
Every 10 minutes
Assigned by
NonStop Kernel
operating system
for information on