Zhrmtableinfo Group Maintenance; Zhrmthreshold Group - HP T9576G06 Management Manual

Host Resources Subagent

zhrmTableInfo Group Maintenance

Most zhrmTableInfo group values are derived from hrStorage group and hrDevice
group values as
refreshed immediately after hrStorage group and hrDevice group values are refreshed.
Refer to hrStorage Group Maintenance
Maintenance on page 11-50 for information about when hrStorage group and hrDevice
group values are refreshed.

zhrmThreshold Group

This group, defined by HP, describes RAM storage areas and disk devices in the
hrStorage group, highlighting devices whose usage has reached a critically high level.
Several objects in this group let you control whether the subagent sends traps when
device utilization is too high. The zhrmThreshold group consists of a two groups, one
describing RAM and one describing disks. Each group contains several scalar objects
as well as a table whose entries describe devices whose utilization is excessive.
Objects in the zhrmThreshold group are identified by a check mark in the following list:
iso (1)
identified-organization (3)
dod (6)
internet (1)
Table 11-12 describes. Values in the zhrmTableInfo group are
private (4)
enterprises (1)
tandem (169)
nonstopsystems (3)
zhrm (180)
zhrmThreshold (2)
SNMP Configuration and Management Manual—424777-006
on page 11-34 and
zhrmThrRam (1)
zhrmThrRAMTotal (1)
zhrmThrRAMUse (2)
zhrmThrRAMPercentUse (3)
zhrmThrRAMTrapEnable (4)
zhrmThrRAMHighValue (5)
zhrmThrRAMLowValue (6)
zhrmThrRAMTable (7)
zhrmThrRAMEntry (1)
zhrmThrRAMIndex (1)
zhrmThrRAMDescr (2)
zhrmThrRAMAllocationUnits (3)
zhrmThrRAMSize (4)
zhrmThrRAMUsed (5)
zhrmThrRAMAllocationFailures (6)
zhrmThrDisk (2)
zhrmThrDiskTotal (1)
zhrmThrDiskUse (2)
11 -77
zhrmTableInfo Group Maintenance
hrDevice Group