Sendtrap Failures; Table 10-3. Sendtrap Return Codes And Gentrap Actions - HP T9576G06 Management Manual

NonStop NET/MASTER Trap Subagent
return-code
has the value 1 or 2, as described in
&sys.file.rc-value
contains an integer if the FILE OPEN verb in the openagent function failed:
12 (UDB is inaccessible.)
16 (UDB identifier is unavailable or not found. See &sysmsg for more information.)
&sys.file.error-value
is the Guardian file error number corresponding to the value of &sys.file.rc.
&sysmsg
is a text message.

sendtrap Failures

Table 10-3 describes the actions GENTRAP takes when sendtrap fails.

Table 10-3. sendtrap Return Codes and GENTRAP Actions

Return Code
0
1
2
3
The format of the message is as follows:
error return-code from sendtrap procedure.
&sys.file.rc = &sys.file.rc-value
&sys.file.error = &sys.file.error-value
&sysmsg = &sysmsg-value
return-code
has the value 1 through 3, as described in
Meaning
The function completed
successfully.
The OID count is less than
0.
The total trap size
exceeds 1500 bytes.
Communication with the
SNMP agent failed.
SNMP Configuration and Management Manual—424777-006
Table 10-2.
GENTRAP Actions
Processing continues.
Processing continues after a message is
displayed at an OCS window.
Processing continues after a message is
displayed at an OCS window.
Processing continues after a message is
displayed at an OCS window.
Table 10-3.
10 -19
sendtrap Failures